Plaster of Paris
Raw Gypsum
Please Install Flash Player
Download from here
  

Plaster of Paris

Home » Products » Plaster of Paris

We are reckoned among the topmost Plaster Of Paris Manufacturers in Jammu. Our Plaster Of Paris is manufactured from finest gypsum. We keep utmost care to prevent it from all sorts of impurities like iron, hard particles, etc. Our White POP has various other features such as optimum strength, perfect consistency, high absorption, and controlled pore size distribution. In addition, our products are well packaged to avoid leakage and provided at reasonable prices.

Benefits :

  • Our plaster is made up of finest gypsum available in the country,there are no harmful impurities in our plaster like Iron, hard particles etc.
  • Our Plaster is superfine@200 Mesh
  • Our plaster has optimized strength.
  • Perfectly consistent setting time and De-molding time.
  • High hardness and high absorption rate.
  • Controlled pore size distribution.

Packaging :
  • Commercial :- 2.5 kgs,18 kgs,20 kgs,25 kgs
  • Ceramic :- 25 kgs,50 kgs
  • Agriculture :- 30 kgs

Problems Arising in Industry :
  • Lumps Too Fine : Plasters will create lumps during paste preparation.
  • Inconsistency : Inconsistency of plaster setting time.
  • Lower productivity and inconsistent quality of molds.
  • Fragile Molds : Low bending strength plasters will produce molds that do not resist tough handling by workers.
  • Short Mold Life : Low mechanical strength plasters yield too low mold surface hardness.
  • Cracks : Plaster that expands or shrinks too much will make cracks on surface.
  • Fast Setting Time : Too Fast Setting Time of Plaster : means not enough time to release bubbles, which results in lower strength, so risks of breakage during the handling of molds.
  • Long Drying Time : Plaster with bad porosity will bring too long drying time of molds after usage.
  • Surface Problems : Hard particles in plaster will destroy surface of your product.
  • High Iron Content : Plaster will create black spots on clay ware.
  • Set Plaster Lumps : Plaster badly protected from moisture will have lumps that will destroy surface of clay ware.

Specification Parameters We Consider :
  • Plaster Water Ratio
  • Initial Setting Time
  • Final Setting Time
  • Ring Value
  • 1 Hour M.O.R. Kg/cm2
  • M.O.R
  • Combined Water Ratio
  • Porosity
  • Acid Insoluble
  • Iron Content
  • Silica Content

To enquire about the desired product(s), just check the box and then click “Enquiry Now” button which is provided below.

Plaster of Paris (Sanitary Grade)

Features :

  • Consistent Setting Time
  • Longer Mould Life
  • Iron Free : Higher iron content creates black spots on the clayware.
  • Superfiness @200 mesh

Plaster of Paris (Sanitary Grade)


Plaster of Paris (Pottery Grade)

Features :

  • Consistent Setting Time
  • Longer Mould Life
  • Iron Free : Higher iron content creates black spots on the clayware.
  • Superfiness @200 mesh

Plaster of Paris (Pottery Grade)


Plaster of Paris (Commercial Grade)

Features :

  • Snow White Colour
  • By Applying Directly On Brick Walls Saves Labour, Material, Time and Money, A Alternate to Final Cement
  • Labour Friendly Due to Accurate Setting Time.
  • A Source to Reduce Cost of Construction.
  • Due to Superfiness the Plaster Has Higher Hardness with Negligible Pores So It Absorbs Less Paint.
  • Super Hit Plaster Even Without Paint Quotes Gives a Finished Look.

Plaster of Paris (Commercial Grade)


Plaster of Paris (Medical Grade)

Uses :

  • Used for Making Bandages
  • Other surgical uses that require fast setting time.

Plaster of Paris (Medical Grade)


Plaster of Paris (Chalk Grade)

Features :

  • Very high whiteness in
  • Appropriate rise in temperature
  • Useful for Making dust less chalks

Plaster of Paris (Chalk Grade)



Select and click Select All   |   Clear All  

Select Language:   English   French   German   Italian   Portuguese   Spanish